OutBack MX60 MPPT Charge Controller

The OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance.

Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 VDC with PV open circuit voltage as high as125 VDC. The MX60's setpoints are fully adjustable to allow use with virtually any battery type, chemistry and charging profile.

The OutBack MX60 allows you to use a higher output voltage PV array with a lower voltage battery - such as charging a 24 VDC battery with a 48 VDC PV array. This reduces wire size and power loss from the PV array to the battery/inverter location and can maximize the performance of your PV system.

The OutBack MX60 comes standard with an easy to use and understand display of the PV system’s performance. The four line, 80 character, backlit LCD display is also used for programming and monitoring of the system’s operation.

OutBack MX60 MPPT Specifications: • Output Current Rating: 60 amps DC maximum at 12,24 or 48 VDC

• Nominal Battery Voltage: 12, 24, 32, 36, 48, 54 or 60 VDC (programmable)

• PV Open Circuit Voltage: 125 VDC maximum

• Standby Power Consumption: Less than 1 watt typical

• Charging Regulation Methods: Five Stage: Bulk, Absorption, Float, Silent, Equalization

• Voltage Regulation Setpoints: 13 - 80 VDC

• Equalization Voltage: Adjustable 1.0 to 5.0 VDC above bulk setpoint

• Temperature Compensation: Programmable slope -2.0mV/oC/cell to -5.0mV/oC/cell

• Voltage Step-Down Capability: Can charge a 12 or 24 VDC battery from a 48V nominal PV array

• Power Conversion Efficiency: 99.1% @ 40 amps output / 97.3% @ 60 amps output

• Digital Display: 4 line 80 character backlit LCD display

• Remote Interface: RJ 45 modular connector CAT5 cable 8 wire

• Operating Temperature Range: -40 to 60oC power derated above 25oC

• Environmental Rating: Indoor Type 1 • Conduit Knockouts: Two 3/4 - 1” on the back; One 1” - 1 1/2 “ on each side; Two 1” - 1 1/2” on the bottom

• Warranty: Two years parts and labor; optional extended warranty

• Dimensions: Enclosure - 14.5 “ H x 5.75” W x 5.75” D / Shipping box - 17.75” H x 10” W x 7”

• Shipping Weight: 12 lbs. - 5.4 kg



Contact us regarding bulk pricing or international shipping quotes.
Call our Solar Zone 1-800-691-9127
Email - info@eSolarZone.com
The payment methods below are accepted in our secure checkout.